Wireless Headsets for Wired Intercom

Wired Interface Series

add wireless headsets to existing partyline

Interface and HUB transmitting from rack mounted intercom to wireless ultralite headset.

Interface and HUB transmitting from rack mounted intercom to wireless ultralite headset.

Software controlled interface module plugs into wall jack or rack mounted power console by XLR connector.

Simple set up. Connect the interface to the hub and adjust signal levels marrying wired to wireless audio.

Communicate in full duplex. Up to eight wireless users can roam freely and communicate with the wired intercom just as if connected by a floor cable.

Full Duplex / Eliminate Floor Cables / Wireless Headsets for Wired Intercom

HUB-INT interface systems are the answer to the age-old problem of how to affordably add wireless headsets to permanently installed wired intercoms.

Eartec has met this challenge by engineering a special software controlled circuit that plugs into the wired party line and a HUB, mini wireless base station repeater.

Dial adjustments directly on the interface module balance the signal levels between the wired system and the HUB creating a seamless audio link.

Up to eight crew utilizing UltraLITE or UltraPAK transceivers can roam freely connected with the wired system just as if they were plugged in by a floor cable.

Operating in the non-licensed DECT band (Digital Enhanced Cordless Technology), the HUB Interface series with UltraLITE or UltraPAK is not affected by and will not interfere with other RF equipment such as WiFi or wireless microphones.

To get started with a wireless to wired interface first visit the HUB page and learn all about the outstanding performance features of this compact digital signal relay.

All customized Interface packages includes a HUB along with an Interface module. Finish formulating a customized wireless package by choosing any combination of UltraLITE wireless headsets and/or UltraPak transceivers with discreet lightweight headsets (up to 8) that will connect seamlessly with your wired system. Adding Wireless Headsets for Wired Intercoms has never been easier.

Select (1) Interface Module, (1) Hub, and up to (8) roaming headsets below.

Click Here for a list of features and specifications for the HUB Full Duplex Wireless Intercom System

Select (1) Interface module:

Choose Your System

For Clearcom Wired System $295

For Telex & AudioCom Wired System $295

For RTS Wired System $295

For Production Intercom Wired System $295

For PortaCom & Anchor Audio Wired System $295

The HUB Interface

Links your HUB Mini Base to an existing Partyline.

The interface Module plugs into the HUB and then directly into the rack mounted power console or a wall mounted headset jack. Establish a seamless audio link with your crew providing tremendous mobility, simultaneous talk, and hands-free communication with the wired party line just as if connected by a floor cable.

Select (1) HUB Mini Base

Each HUB comes complete with a rechargeable Lithium battery and Multi-Port charger that charges The HUB battery, as well as UltraLITE™ headset batteries in individual bays. When each battery reaches full charge the corresponding LED turns from red to green indicating that the battery is ready to go. This feature allows users to have extra batteries on hand in the charger whenever necessary.

HUB Mini Base $495

Select Any Combination of Roaming Headsets (up to 8):

UltraLITE Single Headset $175

Deluxe Padded Ear-cup Design
Full Duplex, Hands Free
Headsets’ Mic Boom Swivels 270º, Wear on Left or Right
Mic mutes when boom is in UP position
Includes battery

UltraLITE Double Headset $195

Deluxe Padded Ear-cup Design
Full Duplex, Hands Free
Headsets’ Mic Boom Swivels 270º, Wear on Left or Right
Mic mutes when boom is in UP position
Includes battery

UltraPAK beltpack for lightweight headsets $175

UltraPAK beltpack
Battery

Cyber Headset $49

Plug-In Cyber headset
Fits UltraPAK beltpack

Monarch Headset $85

Plug-In Monarch headset
Fits UltraPAK beltpack

Max 4G Single Headset $95

Plug-In Max4G Single headset
Fits UltraPAK beltpack

Max 4G Double Headset $110

Plug-In Max4G Double headset
Fits UltraPAK beltpack

Softside Case $35 – $45

Eartec’s Softside Case will keep your wireless system stored safely. Constructed of waterproof nylon this headset bag/case includes internal compartments so the headsets stay organized. There is also a pocket with Velcro enclosure for the charger and any spare batteries. The molded hard plastic handle makes transport easy and convenient for “On Location” work.

Complete Systems Include:

Batteries

Multi-Port Charger

Wireless Headsets for Wired Intercom