PRO16 Programming Switch

BEGIN WITH ALL HEADSETS OFF.

1. Press power button on the #2 “MAIN” to turn on headset, (LED flashes green).
2. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red.  The main is now in “program mode”.
3. Power on “Remote Switch” headset to be programmed, (LED flashes green).
4. Quickly press volume down 3 times, then press and HOLD volume up button.  LED will flash green/red, then quickly flash green.    The LED will then go to solid RED.  The headset is now programmed. 
5. Once the “Remote Switch” headset has been programmed, click the power button on both headsets to turn them off and complete the programming process.

* REPEAT ENTIRE PROCESS ON THE #1 “MAIN” *

1-800-399-5994   www.eartec.com

print this page